If you work in high-end post production, visual effects, animation, video editing, matte painting, audio recording or any creative field for that matter, you probably have already heard about HP’s top of the line workstation, the Z840, found throughout the industry in leading computer animation studios, color suites, editing facilities, production companies and by creative professionals.
In addition to reviewing the Z840 in this article, I will also review the HP Z27s 4k IPS display, a high resolution monitor that offers excellent color fidelity and the ability to reproduce intricate details (as well as plenty of pixels for the user interface).
I’ve created a comprehensive video review of both the HP Z840 workstation and the Z27s display which you can watch below. This article pretty much mirrors the video (with some extra things added to the mix). Depending on your preference you can either watch the video, or read the story. Or you can do both.
Here’s the video review of the Z840:
The first impression one has when removing the HP Z840 workstation from its box that it is one heck of a solid machine, designed to withstand the most demanding and punishing production environments. It’s built like a tank with thick solid metal sides that seem capable of repelling sledgehammer blows or surviving an earthquake.
The machine weighs more or less fifty pounds depending how you configure it with a height of 17.5 inches, width of 8 inches and a depth of 20 inches. It’s not that heavy, but not exactly light either, but workstations are not designed to be ultra light, there made to crunch through the most daunting computing challenges, often needing to render frames 24 hours a day, seven days a week. Thankfully there are sturdy handles at the top of the machine that make it easier to move around.
A new Z840 comes with a layer of protective plastic on the side which you’ll probably want to remove. It takes a little elbow grease to peel it off, so make sure you get a good grip. Don’t forget to peel of the plastic covering on the handle while you’re at it.
One of the first things I noticed about the HP Z840 is that it’s darker than its predecessors the Z820 and the original Z800. I prefer the darker look, and think it adds to a classier look.
On the Outside
The HP Z840 Workstation has a chassis that is one of the industry’s most expandable. We’ll take a look at what’s inside of the machine in a bit, but first let’s have a look at the outside.
If you like, you can mount the workstation on a rack with a set of extendable rails which you can purchase separately from HP. This is a handy option for large facilities and machine rooms. More information about rack mounting can be found here.
On the front of the workstation, there’s a slim line optical drive bay, two external 5.25 inch Bays into which you can install things like a front loading media card reader (or more drives), power button, hard drive activity LED, 4 USB ports (the top one has charging capability), headphone jack and microphone jack.
On the back of the machine, there’s the power connection, a serial port, PS/2 keyboard and mouse ports, audio line in, audio line out, 2 USB 2.0 ports, 4 USB 3.0 ports, 2 RJ-45 Gigabit LAN ports, four displayPort 1.2 connections, One DVI connector, Thunderbolt 2, and a pair of keys which are used lock up the system and keep it safe when you’re not around.
On the Inside
Opening the chassis is easily done by pulling the side off from the handle. There’s a handy overview and diagram of the system board laser-etched on the back of the side panel for convenient reference.
Once the side is off, you’re greeted by green touchpoints which help indicate what to remove to access the internal components of the machine. There’s a door at the bottom to access the PCI slots, SATA and SAS ports. Above that is a structure which houses fans designed to cool the CPUs, memory and other components on the system board and is designed to guide the airflow effeciently through the interior.
The Z840’s power supply is removable and is available in 850 or 1125 watt options. Being able to remove it makes it convenient to replace should something ever go wrong with it.
At the heart of the Z840 are two Intel Xeon E5-2600 Haswell processors which are available with up to eighteen processing cores each. These two have fourteen cores each for a total of twenty eight physical cores and 56 threads. The Haswell processor architecture delivers faster compute performance and feature Intel Advanced 256 bit Vector Extensions,floating point instructions and gather operations which improve codecs, image and digital signal processing and mathematical operations.
The two Xeon processors, which are located behind two large black ventilation housings, also support ECC memory logic and 40 lanes of PCIe Gen 3 i/o for each processor.
The HP Z840 has a total of 16 DIMM slots which use new fast DDR4 2133 MHz ECC Memory (a 14% increase in performance speed over DDR3). The Workstation is able to support a maximum of two terabytes of memory if you add sixteen 128 MB DIMMS. That’s quite a lot of memory, if you don’t mind me saying. This system had a total of 64 Megabytes which results from eight megabyte DIMMs installed into eight of its slots.
The Z840 utilitizes PCIe Gen 3 technology which delivers a peak bandwidth of 16 GB/s, twice as fast as PCI Gen/2. There’s a total of up to seven high performance graphics and I/O slots including support for up to three PCIe 3.0 graphics cards in PCIe 3.0 x16 slots. That will be welcome news for 3D artists using GPU rendering software like Octane since the more GPUs you have, the faster the rendering.
The workstation in this review has a Quadro M6000 GPU, NVIDIA’s most powerful pro graphics card. The M6000 features NVIDIA’s powerful Maxwell GPU architecture, 3072 CUDA parallel processing cores and 12 GB of GDDR5 RAM with an ultra fast memory bandwidth of 317 GB/s. In addition the Quadro M6000 has a new display engine that drives up to four 4k displays natively with DisplayPort 1.2 support for high resolutions like 4096 X 2160. Four 4K displays, can you imagine how cool that would be?
Underneath the Quadro GPU, there was an HP Thunderbolt 2 PCIe I/O card in one of the PCI slots which provides 20 Gb/s of data in each direction, four times the speed of a USB 3.0 connection. The card also provides DisplayPort 1.2 capability with multi-stream transport support. Thunderbolt is a great connection for simultaneous 4k video capture and display as well as allows you to connect external GPUs and RAIDs to your system.
Beneath the Thunderbolt card in the Z840 is a 512 Gigabyte HP Z Turbo Drive G2. If you haven’t heard about HP’s Z Turbo Drive, it’s an innovative and revolutionary PCIe based SSD storage solution which uses Samsung’s NVMe technology. It allows for ultra-fast storage speeds and is great for things like 4k video editing among other things. Just how fast is it? We’ll talk about that in a minute.
Near the front of Z840 are four internal drive bays which are easily removed by a handle. The first two bays each contain 512 gigabyte SSDs which have been configured into a 1TB RAID. Under those was another SSD which was not part of the RAID. At the bottom of the stack was a 2TB spinning hard disk drive which can be used for storage and backup, or as a working drive if you like. Above the stack of hard drives are two more 5.25 inch external hard drive bays.
Speed Tests and Benchmarks
I used CrystalDiskMark to check the speed of the drives. I had heard that the Turbo Drive G2 was fast, and it certainly was. In the chart below, I’ve included results for the sequential reads and writes. As you can see, with a speed of 2,235 MB/s, the Z Turbo Drive G2 is more than four times faster than the SSDs.
However, if you think that’s fast, and it is, you’ve got another thing coming. The new Z Turbo Drive Quad Pro from HP is a new storage solution which effectively puts four M.2 Turbo Drive G2s in a RAID configuration onto a PCIe Express 3.0 x 16 card. Not only does that give you more storage space than a single Z Turbo Drive (up to two terabytes), but thanks to the RAID configuration, the Z Turbo Drive Quad Pro delivers speeds up to 9 GB/s. That’s more than sixteen times faster than an SSD and four times faster than a single Z Turbo Drive. Those are incredible, jaw dropping speeds and very useful for high resolution workflows. The nice thing is that it comes at a modest price too. Definitely worth looking into, in my opinion.
Cinebench is comprehensive benchmarking software that measures the performance of the CPU and GPU. I started with the GPU test which, in this case was the Quadro M600M. During the test, it runs a real time 3D animation of a car race that includes lighting, reflections, shadows and texture maps to see haw quickly the graphics card is able to render it.
The result of the GPU test was 145.61 frames per second. As you can see in the ranking, that blows the other graphics cards listed beneath it out of the water. To see how the Quadro M6000 compares to your graphics card, download Cinebench and run it on your own computer.
Next, I ran the CPU test which is comprised of a 3D render that includes reflections, global illumination, transparency and other advanced rendering challenges. The results of the CPU test was 3285. an extremely fast and impressive result and substantially faster than I have ever seen.
After I examined the internals and externals of the HP Z840, What else can you say but Wow. Between the powerful 14 core dual Xeons, fast DDR 4 2133 MHz memory, top shelf NVIDIA Quadro M6000 GPU, Z Turbo Drive G2 and Thunderbolt 2 ports this is certainly one of the most advanced and capable workstations on the planet that will help you realize your visions whether you are a filmmaker, animator, visual effects artist, digital painter or music producer.
HP has a great legacy in engineering and systems design which goes all the way back to the beginning of Silicon Valley. In the Z840, they have created a machine that represents the latest and greatest in workstation design.
The HP Z27s
If you work in 4K or just want more pixels to work with, you’ll definitely want to check out the HP Z27s IPS UHD 27 inch Display. It’s an Ultra High Definition (UHD) monitor with a resolution of 3820 x 2160 pixels. The Z27s has an sRGB color gamut with 1.07 billion colors for vivid and detailed color reproduction. Being an IPS display, it also has wide viewing angles of 178 degrees which makes it useful for presentations or work reviews with your team. You can even mirror your smart phone or tablet to the large screen through an MHL connection that also charges them up at the same time.
The Z27s comes with a collection of cables such as DisplayPort and mini DisplayPort, as well as a CD which contains drivers for the display.
The monitor swivels from side to side and can be lifted higher and lower as you like. You can also rotate the display 90 degrees and use it vertically. This can be useful if you are working on a tall matte painting, for example.
There are two Super Speed USB 3.0 ports conveniently located on the side of the Z27s in addition to the main connections which are under the display panel which include Display Port 1.2, mini DisplayPort, HDMI 1.4, MHL 2.0, USB 3.0, and audio connections.
I displayed several 4k images on the monitor and they were stunning to look at. I recommend you have a look with your own eyes. It is almost impossible to distinguish the individual pixels unless you look through a magnifier. The images appeared to be continuous tone with tiny miniscule details all rendered perfectly. The only thing better than this monitor is having two of them connected to your system, or why not three or four since the NVIDIA M6000 supports up to four 4k displays.
I used the HP Z840 and the Z27s disply to edit the video above in Premiere Pro. The HP Z80 was very snappy and responsive, just as you would expect with smooth scrubbing and playback, and the UHD display provided plenty of pixels to work with. In this case I worked at 1080p HD and was able to view the full image at 100% with plenty of room left over for the timeline and control panels. Next I opened a large Pro Tools project. Again, the 4k display provided ample room for the project window, mixer, midi editor and plug in controls, while the dual Xeons in the Z840 provided more than enough power to drive Pro Tools’ audio engine.
When using a 4K monitor, you might find that the menus and icons may seem a little small. I don’t mind small menus, keep in mind that Windows 10 has new scaling options for 4K displays. The machine I reviewed shipped with Windows 7, the operating system many still prefer since they can depend on its proven reliability. Personally I like Windows 10, but can understand if some are nervous about driver incompatibility.
The HP Performance Advisor
There’s a nice piece of software that comes with every HP workstation called the HP Performance Advisor that I demonstrated in the video and which I think is worth mentioning. You can use it to get all kinds of useful information about your system such as memory, drives, PCIe cards, processors and much more. Rather than describing it here, you can see it in action in the video (Maybe there is a reason to both watch the video and read the story as well after all).
What is a workstation? A very powerful computer? A movie making machine? A recording studio in a box? An artist’s creative playground? An enabler of dreams? A partner that helps you realize your wildest creative visions? Yes, yes, yes, yes, yes and yes. Its all of those things and more and the HP Z840 is the latest incarnation of the world’s leading workstation. Paired together with the Z27s 4K IPS display and you’ve got an unbeatable powerhouse of a system that can take you to new heights of creativity limited only by your imagination. More information about, as well as pricing details about the Z840 can be found here. To find out more about the HP Z27s UHD display, click here.
Note: If interested, you can see my review of the HP Z840’s predecessor, the Z820, by clicking here.